8×4 Concrete Pump Truck
- Max Concrete Output
- 60–180 m³/h
- Max Placing Height
- Model-specific; matched to the four-axle chassis and boom
- Boom Sections
- 4–7
- Engine Options
- Multi-brand engine / chassis options
- Drive Configuration
- 8×4
- Steering
- LHD / RHD
Reference configuration. Final values are confirmed for the selected chassis, model and destination.
About the 8×4 Concrete Pump Truck
The KEEYAK 8×4 Concrete Pump Truck is a four-axle concrete placement vehicle carrying a pump, receiving hopper, delivery pipeline, and articulated placing boom. This multi-axle boom pump transfers compatible fresh concrete from mixer discharge to planned pour locations. Specifications include max concrete output (60–180 m³/h) and boom sections (4–7).
It is intended for major contractors and concrete service companies working on large structural or infrastructure projects. Required reach and pump demand determine the equipment to assess. Superstructure mass affects axle distribution; the finished vehicle must fit the turning path and site setup. Ground-bearing capacity must suit that setup, with mixer flow and cleanout arrangements planned for the pour.
Applications for 8×4 Concrete Pump Truck
High-Rise Structural Pours
The truck-mounted concrete pump supplies elevated structural zones from an engineered setup area when boom coverage, wind limits, and site controls are suitable.
Bridge Deck Construction
Crews place compatible concrete across bridge sections while coordinating stabilizing positions, mixer access, pour sequence, pipeline movement, and traffic controls.
Large Industrial Slabs
The pumping vehicle supports continuous slab placement where delivery scheduling, output demand, boom coverage, joint planning, and washout management are aligned.
Infrastructure Pier Placement
Contractors convey concrete to prepared piers, columns, or retaining structures where excavation edges, overhead hazards, and ground reactions have been assessed.
Before you order
When is the 8×4 Concrete Pump Truck the right choice?
Consider a four-axle pump where the selected boom and pumping system meet the pour requirements within the site’s support and access limits. Compare the actual envelope, not axle count alone. High-rise work still requires a placing plan for the specific structure.
