Asphalt distributor truck
- Tank Capacity
- 3–20 m³
- Spray Width
- 3.6–6 m
- Application Rate
- 0.25–3.0 L/m²
- Tank Material
- Carbon steel
- Drive Options
- 4×2 / 4×4 / 6×4 / 6×6 / 8×4
- Steering
- LHD / RHD
Reference configuration. Final values are confirmed for the selected chassis, model and destination.
About the asphalt distributor truck
The KEEYAK Asphalt Distributor Truck is a road-maintenance vehicle that carries, conditions, and meters compatible liquid asphalt through a pump-fed spray system. This bitumen distributor applies a controlled binder layer across prepared pavement using selected spray-bar and nozzle arrangements. Specifications include tank capacity (3–20 m³) and spray width (3.6–6 m). These ranges cover different builds; confirm usable tank volume and the width and application-rate combination for the selected equipment.
It serves road contractors, maintenance authorities, and surface-treatment crews performing planned binder applications. Asphalt type and handling temperature determine the tank and circulation requirements. The pump range must support the required spray width and application rate. The specification also needs to cover chassis loading, with an agreed calibration method and cleaning procedure. For a quotation, provide the binder specification and supplier instructions, planned treatment area, refill arrangements and destination.
Typical applications
Tack coat application
The asphalt sprayer places a calibrated bonding layer on a clean existing surface before a new asphalt course is laid and compacted.
Chip seal binder placement
Crews distribute compatible binder uniformly ahead of aggregate spreading, coordinating application rate, lane coverage, material condition, and following equipment throughout each treatment pass.
Fog seal treatment
The binder spray truck applies a project-specified diluted or emulsified binder to suitable pavement surfaces when engineering requirements call for fog sealing.
Local pavement repairs
Maintenance teams spray controlled binder on prepared patch areas or repaired edges where nozzle selection and coverage must match the limited work zone.
Before you order
What work is an asphalt distributor intended for?
It applies the specified binder for tack coats, chip seals, fog seals or local pavement repairs. Material suitability and the spray system must match the agreed treatment.
Want a vehicle built to your specifications?
Guides to choosing and using your vehicle
Compare vehicle types, check operating limits and find advice on buying, inspection and maintenance.