De-icing material spreader truck
- Hopper Capacity
- 5–20 m³
- Spreading Width
- 2–12 m
- Spreading Rate
- 5–300 g/m²
- Spreading Capacity
- 20–80 t/h
- Conveyor Speed
- 0.5–2.5 m/s
- Spreading Accuracy
- ±5–10%
Reference configuration. Final values are confirmed for the selected chassis, model and destination.
About the de-icing material spreader truck
The KEEYAK De-Icing Material Spreader Truck is a salt spreader truck with a hopper or liquid tank, controlled conveyor or pump, and distribution device that applies selected de-icing or traction material across the roadway. Hopper capacity is 5–20 m³, with a spreading capacity of 20–80 t/h. Match the hopper and distribution system to the treatment duty.
Municipalities, highway agencies, airports, and industrial sites use this gritter truck before or after freezing conditions. Specify the material type and dosage control for the weather conditions. Spread width must be assessed at the planned road speed. Hopper or tank design must suit the material, with corrosion protection and calibration requirements defined. Check chassis loading for the completed vehicle.
Typical applications
Preventive road de-icing
The winter maintenance spreader applies brine or pre-wetted material before forecast freezing, subject to pavement temperature, weather timing, and local treatment policy.
Post-snowfall salt spreading
Crews distribute dry or wetted salt after plowing to address remaining bonded snow or ice under conditions where the selected agent remains effective.
Mountain road gritting
Operators spread salt, sand, grit, or approved mixtures on steep routes where traction, low temperatures, curves, and wind require controlled application.
Airport and facility treatment
Configured units treat designated airside or industrial pavements using materials approved for the site, with precise route, dosage, and contamination controls.
Before you order
Which buyers should consider the de-icing material spreader truck?
Use a spreader for an agreed winter-treatment plan requiring controlled application of a compatible material. Match storage, metering and spreading equipment to the product and road width. Material application is different from physically removing snow, unless a separate plow is fitted.
