Dust Suppression Truck
- Water Tank Capacity
- 10–30 m³
- Spraying Range
- 30–120 m
- Spraying Width
- 20–80 m
- Water Flow Rate
- Fog cannon and low-pressure pump flows specified separately
- Water Pump Pressure
- 1.0–3.0 MPa
- Fog Cannon Rotation Angle
- 180–360°
Reference configuration. Final values are confirmed for the selected chassis, model and destination.
About the Dust Suppression Truck
The KEEYAK Dust Suppression Truck is a mist cannon truck that carries water and uses a pump-driven atomizing system to project fine droplets over dusty areas, helping capture airborne particles and wet dust-generating material. Available configurations include water tank capacity (10–30 m³) with spraying range (30–120 m).
It serves demolition contractors, mines, quarries, ports, stockyards, and municipal environmental teams. Operating conditions, route access, task duration, and duty cycle influence the final vehicle configuration. Confirm fog-cannon water consumption separately from any low-pressure road-watering pump flow, together with spraying width, working pressure and chassis limits.
Applications for Dust Suppression Truck
Demolition Dust Control
The dust control truck directs mist toward active demolition zones where airborne particles form, with placement adjusted for wind and safe stand-off distance.
Quarry Crushing Areas
Operators target crushers, screens, transfer points, and stockpiles to suppress localized dust without relying only on broad ground-level water spraying.
Bulk Material Stockyards
Fine spray wets exposed coal, ore, aggregate, or other compatible stockpiles during handling, subject to moisture limits and material-management requirements.
Port and Industrial Yards
The fog cannon vehicle controls dust around loading zones, conveyors, and open yards where mobile coverage supports changing operational locations.
Before you order
Who is the Dust Suppression Truck best suited for?
The Dust Suppression Truck serves demolition contractors, mines, quarries, ports, stockyards, and municipal environmental teams. Typical work includes demolition dust control and quarry crushing areas.
Ready to review your configuration?
Dust Suppression Truck
Want a Truck Built to Your Specifications?
Buyer guides for the next decision
Use the decision guides to prepare inputs before requesting or approving a project configuration.