Bulk Cement Tanker Truck
- Tank Capacity
- 2,000 L–30,000 L
- Tank Material
- Carbon Steel
- Air Compressor
- 10–12 m³/min
- Working Pressure
- 0.2–0.22 MPa
- Discharge Rate
- 1.2–1.5 t/min (source; verify)
- Residual Rate
- ≤0.2%
Reference configuration. Final values are confirmed for the selected chassis, model and destination.
About the Bulk Cement Tanker Truck
The KEEYAK Bulk Cement Tanker Truck is a cement bulker truck with a sealed silo tank, aeration system, discharge piping, and compressed-air source that fluidizes dry powder for controlled pneumatic unloading. The product range includes tank capacity (2,000 L–30,000 L) and working pressure (0.2–0.22 MPa), depending on configuration.
Cement producers, ready-mix plants, contractors, and dry-bulk distributors use this silo truck for direct site delivery. Product density, flow behavior, tank volume, pressure rating, compressor duty, discharge line, receiving-silo venting, chassis loading, road access, and cleaning requirements determine suitability. Final chassis and operating configuration must be confirmed before ordering.
What Is a Bulk Cement Tanker Truck Used For
- Ready-Mix Plant SupplyThe dry bulk tanker delivers cement to a ready-mix plant silo using controlled air pressure and a receiving connection with adequate vent filtration. Suitability depends on tank capacity and site conditions.
- Mobile Batching Plant DeliveryConstruction projects receive dry cement at temporary batching plants where access, hose routing, compressor power, and receiving-silo capacity are confirmed before unloading. Selection depends on working pressure, duty cycle, and site conditions.
- Cement Depot ReplenishmentRegional depots accept bulk deliveries for onward distribution, with product identification, silo assignment, transfer pressure, and dust-control procedures coordinated at arrival. The selected tank capacity must match operating conditions and site access.
- Compatible Powder TransportSelected mineral powders may be carried when density, aeration behavior, abrasion, contamination limits, tank design, and receiving system are separately verified. The selected working pressure must match operating conditions and site access.
What buyers usually confirm first
How does pneumatic cement unloading work from the tanker?
Compressed air enters the tank and aeration devices, helping fluidize powder toward the outlet. Pressure then conveys material through the discharge hose to the silo. Buyers should confirm task requirements, duty cycle, and site conditions before ordering.
