Map where the person and tools need to work
Start with the required platform positions, people, tools and materials. A maximum working-height label may include an assumed reach above platform floor height, while actual access also depends on outreach and the boom’s path around obstacles.
Use the exact model’s working envelope at the proposed load. Then review parking and setup space, ground, traffic and electrical hazards. An insulated-looking boom is not evidence of electrical protection, and basket capacity is not a material-hoist rating.
Review the personnel platform as a complete working system
The truck must reach the site, deploy its supports and provide the required upper and lower controls, interlocks and emergency lowering. OSHA guidance helps frame the questions, while the selected manufacturer instructions and destination rules control the actual work.
Scroll horizontally to view all columns.
| Decision | What to establish | Condition or limit |
|---|---|---|
| Working envelope | Map required positions against the exact boom and platform envelope. | Maximum working height does not prove side reach or obstacle clearance. |
| Platform load | Add people, tools and materials within the manufacturer rating. | Basket capacity is not a crane or material-hoist rating. |
| Setup | Verify chassis, outriggers, pads, slope, ground and traffic space. | Road access does not prove a stable work setup. |
| Safety systems | Specify upper and lower controls, emergency lowering and required interlocks. | Generic controls or an insulation claim require exact configuration evidence. |
Turn a bucket truck inquiry into a work description
A bucket truck or truck-mounted aerial platform inquiry should describe where the person needs to work and what must travel in the platform. State that you need a truck-mounted personnel platform so the offer is not confused with a self-propelled lift or a material-handling crane.
Altec separates aerial-device applications and insulating, non-insulating and boom configurations. Those distinctions are useful questions for an inquiry, but its product claims do not establish the specification or electrical suitability of another manufacturer's truck. Altec aerial devices
Scroll horizontally to view all columns.
| Task | Information from the site owner | Record required with the offer |
|---|---|---|
| Streetlight or sign maintenance | Target locations, access hours, parking position and crew tools | Working-envelope drawing marked with the intended platform positions |
| Access around an obstruction | Obstacle dimensions and the required approach to the work face | Proposed boom path and clearance review for the selected layout |
| Work involving electrical hazards | Electrical conditions and the responsible utility's approved work method | Exact device classification and applicable evidence for utility review |
Request a proposal against representative task positions
Send a site sketch with platform locations, loads, access and known hazards. Require exact ratings, inspection status and emergency arrangements. Keep electrical suitability and work-at-height planning with qualified parties rather than inferring them from product appearance.
Information to prepare for this review
- Required platform positions and obstacle geometry
- Workers, tools and material load
- Vertical height, horizontal outreach and below-grade duty
- Setup area, ground, slope and wind conditions
- Traffic and electrical hazard assessment
- Destination approval, training and inspection requirements
Records to request and keep
- Task-position and hazard map
- Exact working-envelope and platform-load data
- Chassis, outrigger and ground-setup calculation
- Functional, emergency-control and inspection records
Common mistakes and what to check instead
- Choosing by maximum height: Check platform height, outreach, boom path, load and setup footprint together.
- Treating an aerial platform as a crane: Keep personnel-platform and material-lifting ratings separate.
- Assuming electrical insulation: Verify exact category, configuration, test status and use limitations.
Scope of this guide
This guide does not approve work near electricity, at height or on a public road.
Qualified planning, trained operators and the exact manufacturer instructions remain controlling.
Stop work for unsafe ground, wind, traffic, electrical exposure, failed controls, missing inspection status or a load outside the approved envelope.
Sources and applicability
Manufacturer descriptions of aerial-device applications and configurations. No Altec rating, insulation or approval claim is transferred to a KEEYAK truck.
Sources checked:
Controls the project-input, quotation, approval and inspection workflow described in this guide.
Provides public checklists and worksheets; the signed project documents remain controlling.
Defines the relevant product family and published configuration boundaries. Project-specific ratings require the selected OEM documents.
Official U.S. reference supporting manufacturer load limits, controls, outriggers, brakes and travel checks. It is not a destination approval or KEEYAK rating.
Official U.S. guidance for worksite assessment, training, inspection, platform load, reach and stabilization. Local rules may differ.